Description
(DC4V 4.2V 4.5V 5V 6V 7.4V 9V 12V) All is ok
Quiescent /Standby Current: 7-9ma
Working Current: 70-130ma ( if your power supply is mini battery , you must care how long can it work for you)
Relay Standard : 20A (( 14VDC 12A 120VAC 7A)
Max Load: 10A (have better load less than 7A)
Size : 34*23*15mm
Working Frequency: 315MHZ/433.92MHZ Optional
Learning Code: Learning Button to add Transmitter
Working Mode: Momentary Toggle Latched adjusted by Learning Button
Momentary—– Press and Hold—ON, Release—-OFF
Toggle——-Press one time —-ON. Press it again —-OFF
Latched——–Press A —-ON, Press B—–OFF (Latched Mode will ship with 2 Button Transmitter)
Momentary 5s Time Delay OFF—– Press and Hold—ON, Release—-5s laterOFF
V- ——————-Input GND –
V+ ——————-Input VCC +
NC———————Normally Close
COM——————Common
NO———————Normally Open
Momentary Toggle Latched adjusted by learning Button
Latched ———-Press the learning button until the receiver LED indicator flash for 1 time then release it
Momentary——Press the learning button until the receiver LED indicator flash for 2 times then release it
Toggle————-Press the learning button until the receiver LED indicator flash for 3 times then release it
Momentary 5s Time Delay OFF——-Press the learning button until the receiver LED indicator flash for 4 times then release it
Clearing Code
Press the Receiver learning button and hold ,until the Receiver LED indicator Flash for 1 times ,and Flash fast for 2 times, and Flash fast for 3 times ,and Flash fast for 4 times ,and Flash fast for 5 times ,then release it , it means the code have been cleared
Learning Code
Momentary/Toggle Mode
Press the Receiver learning button, when the Receiver LED indicator is ON then release it , then press the transmitter Button for 1 time , press the same transmitter buttin for Second times , then press the same transmitter button for the third time ,each time receiver LED indicator will flash for one times , it means learning is finished.
Latched Mode
Press the Receiver learning button, when the Receiver LED indicator is ON then release it , then press the transmitter A button for 1 times ,Receiver LED indicator flash for 1 time,then Press transmitter B button for 1 times ,Receiver LED indicator flash for 1 times. then press the transmitter B Button again , Receiver LED indicator flash for 1 times, it means learning is finished.